{"id":1587,"date":"2026-10-01T14:28:06","date_gmt":"2026-10-01T06:28:06","guid":{"rendered":"https:\/\/www.gzstrade.com\/wholesale-lighting\/led-strip-lights\/"},"modified":"2026-10-01T19:52:17","modified_gmt":"2026-10-01T11:52:17","slug":"led-strip-lights","status":"publish","type":"page","link":"https:\/\/www.gzstrade.com\/es\/wholesale-lighting\/led-strip-lights\/","title":{"rendered":"Wholesale LED Strip Lights from China"},"content":{"rendered":"

Wholesale LED Strip Lights from China<\/h1>\n

LED strip is the lighting category with the shortest distance between factory and failure. It sells by the metre into coves, kitchens, retail displays and signage, and it fails in ways the buyer discovers after installation: a strip that runs dimmer at the far end, a colour that will not match between two reels, or an adhesive that gives up in the first summer.<\/p>\n

\"Roll The photograph shows a representative strip from the category. Chip type, density and waterproofing follow the order sheet, and the image is illustrative rather than a picture of your goods.<\/p>\n

We have sourced strip out of Zhongshan and Shenzhen for five years. The same three failures come back. A strip sold at one chip density arrives with fewer chips per metre, which is invisible until it is lit next to the sample. Copper in the circuit board is thinned to save cost, and the far end of a five-metre run glows visibly dimmer. And a waterproof coating that stayed clear on the sample yellows over the chips within a year.<\/p>\n

This page covers what the chip and voltage words mean, what belongs on the order sheet, and the checks that catch a weak reel. The wider cluster map is in our wholesale lighting overview<\/a>.<\/p>\n

Chips, density and the circuit board<\/h2>\n

The chip number describes the package, and the two families dominate the trade. The smaller package is the workhorse for cove and accent lighting, efficient and cheap at high densities. The larger package carries more light per chip and suits shorter runs and brighter applications. What matters on the order sheet is not the number alone but the chips per metre stated with it, because density is the specification most often quietly reduced.<\/p>\n

The circuit board is where cost hides. Copper thickness decides how much current the strip carries without a voltage drop, and a thinned board shows itself as a dim far end on any run longer than a few metres. The board colour and quality also decide how well the strip sits on its adhesive in warm rooms.<\/p>\n

Voltage is the third decision and it decides the run length. A twelve-volt strip loses brightness over distance faster than a twenty-four-volt one on the same board, which is why longer runs should be specified at the higher voltage. The power supply and the strip have to be specified together, because a mismatch shows up as flicker or as an early death.<\/p>\n

Specifications and minimum order<\/h2>\n

Our minimum order is 1 piece, so you can start with a single unit and scale up once the sample is approved. Every line below changes what the factory builds. We do not print prices or schedules here, because chip prices move; send us the chip type, the density and the quantity, and we come back with a live quotation and a firm production slot.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
Specification<\/th>\nWhat to confirm before you order<\/th>\n<\/tr>\n<\/thead>\n
Chip type and density<\/td>\nthe package and the chips per metre, both stated and verifiable<\/td>\n<\/tr>\n
Voltage<\/td>\ntwelve or twenty-four volts, matched to the run lengths you install<\/td>\n<\/tr>\n
Power per metre<\/td>\nthe figure claimed, with the right to verify it on bulk samples<\/td>\n<\/tr>\n
Colour temperature<\/td>\nkelvin with a tolerance, and the bin matching between reels<\/td>\n<\/tr>\n
Waterproofing<\/td>\nindoor, coated or sleeved, with the coating’s UV stability named<\/td>\n<\/tr>\n
Adhesive<\/td>\nthe tape grade on the back, since adhesives fail in warm rooms<\/td>\n<\/tr>\n
Pedido m\u00ednimo<\/td>\nstated per colour temperature and waterproofing, since each is its own run<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Minimums in strip are driven by binning and coating runs, and a single colour temperature in one waterproofing grade is the most consistent first order. Our sourcing service<\/a> covers the factory screening, the sample round and the verification tests below.<\/p>\n

What the binning and coating words mean<\/h2>\n

Binning is how tightly the factory sorts chips by colour and brightness. Loose binning costs less and shows itself as visible colour differences between reels on the same wall, which is the complaint that ends retail programmes. Asking for the bin tolerance, and checking reels side by side on arrival, is what keeps a cove looking like one continuous light instead of a patchwork.<\/p>\n

Waterproofing comes in three honest tiers. An uncoated indoor strip is cheapest and fine inside dry coves. A coated strip survives splashes and bathrooms. A sleeved strip handles outdoor and wet zones, but the sleeve costs light output and it must be UV-stabilised to stay clear. A coating that yellows is not a quality issue that improves; it is permanent, which is why the material belongs in the specification.<\/p>\n

Two practical points finish the picture. Power per metre is a claim that a power meter verifies in seconds, and a factory with nothing to hide will welcome the check. And the adhesive is the failure that installers complain about most, because a strip that peels off a warm cabinet has to be refixed with something the customer buys themselves.<\/p>\n

What belongs in the purchase order<\/h2>\n

One page attached to the PO is what protects the reorder. Cover these points:<\/p>\n