{"id":1514,"date":"2026-10-01T12:53:06","date_gmt":"2026-10-01T04:53:06","guid":{"rendered":"https:\/\/www.gzstrade.com\/wholesale-wigs\/hd-lace-closure-frontal\/"},"modified":"2026-10-01T19:52:48","modified_gmt":"2026-10-01T11:52:48","slug":"hd-lace-closure-frontal","status":"publish","type":"page","link":"https:\/\/www.gzstrade.com\/es\/wholesale-wigs\/hd-lace-closure-frontal\/","title":{"rendered":"Wholesale HD Lace Closures and Frontals from China"},"content":{"rendered":"

Wholesale HD Lace Closures and Frontals from China<\/h1>\n

Closures and frontals are the finishing pieces of the hair trade. A closure is a small lace panel, typically square, that closes the top of an install; a frontal is an ear-to-ear panel that recreates the whole hairline. Both are ventilated by hand, both are sold by size and parting type, and both are the components most at risk of substitution in bulk orders, because a coarser mesh or a lighter fill is almost impossible to detect in a listing photograph.<\/p>\n

We have sourced closures and frontals out of Xuchang and Guangzhou for five years. The same three failures repeat. The mesh arrives a gauge coarser than the sample, so the panel no longer melts against the skin. Knots arrive unbleached or over-bleached to the point the hair sheds at the base. The parting direction drifts between units of one batch, which ruins a middle-part look across a whole shipment. None of these survive a proper pre-shipment check.<\/p>\n

This page explains the size and parting vocabulary, what belongs on the order sheet, and the checks that catch a substitution before loading. It sits inside our wholesale wigs programme<\/a> next to our human hair bundles<\/a> line, and the cluster structure behind the category is in our guide to the hairpiece hubs<\/a>.<\/p>\n

\"HDThe photograph shows a representative panel of the category. Your size, mesh and parting follow the order sheet, and the image is illustrative rather than a picture of your goods.<\/p>\n

Closure and frontal sizes, in plain language<\/h2>\n

Closures run in squares: four by four inches is the workhorse size, with five by five and six by six giving more parting room at higher cost. Frontals run ear to ear, described as thirteen by four or thirteen by six, where the second number is the parting depth front to back. The bigger the panel, the more ventilation labour it carries, which is why a frontal is not a big closure at the factory but a different build entirely.<\/p>\n

Parting is the other axis. A middle part panel is ventilated in one direction and suits one look; a free part can be styled anywhere on the panel; a three-way part has predefined channels. Substituting parting types mid-batch is one of the most common bulk failures, and it only shows when the installer tries to style against the direction of the hair.<\/p>\n

Specifications and minimum order<\/h2>\n

Our minimum order is 1 piece, so you can start with a single unit and scale up once the sample is approved. Each line below changes what the factory ventilates, so all of it belongs in writing. We do not print prices or schedules on this page, because hair supply and bench calendars both move; send us the sizes, mesh, parting and quantity, and we come back with a live quotation and a firm slot.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
Specification<\/th>\nWhat to confirm before you order<\/th>\n<\/tr>\n<\/thead>\n
Panel size<\/td>\n4×4, 5×5, 6×6 closure or 13×4, 13×6 frontal, stated per unit<\/td>\n<\/tr>\n
Mesh<\/td>\nHD or standard Swiss, named on the invoice, with the gauge matched to the sample<\/td>\n<\/tr>\n
Hair grade<\/td>\nremy or better, with the word defined in the contract<\/td>\n<\/tr>\n
Parting<\/td>\nmiddle, free or three-way, stated per unit and consistent across the batch<\/td>\n<\/tr>\n
Knots<\/td>\nbleached or natural, with the bleaching strength agreed so the base does not shed<\/td>\n<\/tr>\n
Density<\/td>\nthe fill percentage with a tolerance, checked against the sealed sample<\/td>\n<\/tr>\n
Pedido m\u00ednimo<\/td>\nstated per size and parting, since each is a separate ventilation run<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Minimums track size and parting count rather than volume, because every combination is its own bench run. A launch order that holds to two sizes and one parting type ships far more consistently than one that spreads across the whole size chart. Our sourcing service<\/a> covers the factory screening and sample rounds this category depends on.<\/p>\n

What the mesh words mean in practice<\/h2>\n

HD describes a fine, translucent mesh that reads as skin across most complexions. It is genuinely finer than standard Swiss mesh and genuinely more fragile, so the honest factories pack it on rigid boards rather than folded in poly bags. If your shipment arrives with panels folded flat in bags, that handling decision alone has already shortened the mesh’s life.<\/p>\n

Knot bleaching is where quality quietly lives. The knots that fix each hair to the mesh should be small and lightly bleached so they do not read as dark dots. Over-bleaching weakens the knot and the panel sheds from the base; no bleaching at all leaves a dotted hairline. Both extremes pass a photograph check and fail a customer. Ask which strength the factory bleaches to, and have the sealed sample judged against that answer.<\/p>\n

What belongs in the purchase order<\/h2>\n

One page attached to the PO protects every reorder. Cover these points:<\/p>\n